In development

Your AI mould design team. Exact geometry checks every step. Your engineers approve.

Drop in a part. MoldIQ's AI agents plan the opening direction, find every undercut, propose slides and lifters, lay out the mould base and cooling, and draft the BOM. The engine checks each proposal exactly, and your team approves each stage.

Concept mould around a real test partNo undercut in the opening direction · proven exactly

Why

Mould design is manual, and it fails late.

AI can take on the repetitive design work and explore more options than any team has time for. It only helps if every step it takes is checked.

Built for

Mould designers and toolmakers who need undercuts and core/cavity splits checked exactly. Part designers and buyers who want mouldability evidence before a quote. Estimators and process engineers who need a mould model and BOM to estimate from.

The agents

A design team that works every stage.

Each agent owns part of the mould. They hand work to each other, explain every proposal, and wait for your approval before a stage is closed.

  1. Analyst

    Mouldability

    Reads the part, picks the opening direction, and finds every undercut and thin wall.

  2. Parting

    Parting and side actions

    Places the parting line and proposes a slide or lifter for each undercut.

  3. Tooling

    Mould base and cooling

    Chooses standard plates, guiding and ejection, and lays out the cooling circuits.

  4. Costing

    BOM and estimate

    Counts every component into the bill of materials and prepares the estimate.

  5. Reviewer

    Second opinion

    Checks the other agents' proposals against your design rules before they reach you.

Engine

Checks every proposal exactly. Only the engine builds geometry; what it cannot prove, it refuses.

You

Approve each stage. Agents never sign off, export, or change your rules.

AI design run

Watch the agents design a mould. You approve.

Pick a part. The agents work through each stage, the engine checks every proposal, and the run waits for your approval before it moves on. Concept · agent lines illustrative · engine verdicts real

      Starts when in view

      The proof behind the agents · working today

      Every AI proposal meets an exact check.

      This check runs today. Along the opening direction, the engine decides for every face whether it can leave the mould. Amber faces cannot: they are undercuts. Each undercut area is computed exactly, not sampled, and it is the evidence the agents hand to each other.

      capfail · 841.9 mm² · 1 region
      trim coverfail · 237.6 mm² · 3 regions
      enclosurefail · 976.7 mm² · 3 regions
      trayno undercut along +z

      Real results on our test parts. Draft angles are not checked yet.

      Planned

      What the agents will design next.

      Where the product is heading. The parts and their undercut areas are real; mould geometry, motions and sizes are illustrative for now.

      An undercut needs a motion. Each one is checked.

      The Parting agent's proposal for the enclosure's three undercuts: two in its outer walls come free with a slide; one inside a wall needs a lifter, rising with the ejector and moving inward. The engine will prove whether one straight motion releases each, and check the whole stroke for collisions.

      RegionAreaReleaseDepthMotion
      1 · inside +y wall858.6 mm²lifter, inward3.8 mm≈ 13.5° / 25 mm
      2 · cutout +x49.9 mm²slide, +x2.1 mmstroke 4.1 mm
      3 · window −y68.2 mm²slide, −y2.1 mmstroke 4.1 mm
      How these numbers were made

      Areas are computed by the engine. Depths, strokes and the lifter angle are illustrative for now: stroke is depth plus 2 mm clearance, and the lifter angle assumes a 25 mm ejector stroke. Slide motion is drawn at three times its size.

      REFUSED · not releasable by a single motion

      Some undercuts have no straight way out, like a console latch with a closed channel. MoldIQ will refuse them and show why, rather than propose a slide that would jam.

      Guardrails

      AI you can audit.

      The agents do the work where the result can be proven. Your engineers decide where judgement matters.

      1. Every proposal is checked

        No AI output becomes geometry, a number or a decision until the engine has checked it. Only the engine builds geometry.

      2. Every decision is explained

        Each proposal carries its reasoning and cites the design rule it used, with its source and unit.

      3. You approve every stage

        Agents cannot approve, sign off, export, or change your design rules and reference data.

      4. Proven, or refused

        What cannot be proven is "undetermined", never a pass. A refusal says why, so the agent can try another way.

      5. Same part, same answer

        Every result can be reproduced and checked on any computer, years later.

      6. A full audit trail

        Every step is recorded with its reasoning. A design replays without calling the AI again, and every operation is open to a person by hand.

      Where it stands · November 2026

      What is proven so far.

      1. 1

        Import the part

        STEP from any CAD system, checked exactly on entry.

        Being tested
      2. 2

        Set the pull, find every undercut

        An exact verdict per direction, with the blocked faces and their area.

        Tested
      3. 3

        Split core and cavity, with a proof

        Core and cavity must exactly rebuild the insert stock, or the split is refused.

        Tested
      4. 4

        Agents through every stage, you approve

        Agents take the design from part to mould; your team approves each stage, and the record replays without the AI.

        Planned
      Tests behind it2 passed · 1 running · 1 failed · 2 not started

      Each test checks one assumption against a pass mark set before it runs. A failure is reported as a failure.

      1. The same part gives the same answer on every platformPassed
      2. The core/cavity split can be proven exactlyPassed
      3. Real STEP files importIn progress
      4. Exact undercuts and wall thickness run fast enoughUndercuts do; wall-thickness maps need to get faster.Failed on speed
      5. It runs interactively in a web browserNot started
      6. An AI agent can take a design through every approval stepNot started

      Questions

      What exactly does the AI do?

      A team of AI agents works through the mould design: opening direction and undercuts, parting line, slides and lifters, mould base, cooling and the BOM. Each proposal comes with its reasoning, the engine checks it exactly, and your engineers approve each stage. The agents are being designed now; the exact checks behind them are built and tested first.

      How fast will it be?

      Our aim is a proposed, checked mould design in hours rather than weeks for the first pass. That is a goal, not a measured result yet.

      Can I use it?

      Not yet. There is no product: the work is in feasibility tests, published here as they report.

      Who has the final say?

      Your engineers. Agents propose, the engine checks, and a person approves each stage. MoldIQ does not replace the toolmaker's sign-off: a tool is proven by trial shots, not by software.

      What does "proven" mean?

      Exact, or an interval guaranteed to contain the true value. When neither is possible, the answer is "undetermined", never "pass".

      Where does my geometry go?

      Nowhere you have not chosen. MoldIQ is planned to run on your own servers. No design data leaves them unless you choose an AI provider, and even then the agents see measurements and verdicts, not your CAD files.

      Which files will it read?

      STEP for parts, and meshes such as STL. STEP import is being tested now.

      Follow the build.

      Each test result is published here, pass or fail. Sign-up for updates opens later.